9251現場總線控制器9251

• Features

  • 隨時可以與任何制造商的傳感器配合使用
  • 超方便的快速按鈕設置
  • burster TEDS技術，可自動識別所連接的傳感器
  • 通過總線控制器可擴展的現場總線接口
  • 支持基于以太網的現場總線，如PROFINET，EtherCAT，EtherNet/IP、I/O接口等
  • 通過總線控制器同步輸出多達8個測量通道
  • 完整的測量數據導出工具
  • 適用于力，壓力，位移，轉速和扭矩測量，包括組合測量
  • 每個9250放大器都可通過按鈕或I/O信號清零
  • 每個放大器模塊最多選配兩個實時信號/限位開關
  • 通過USB端口使用DigiVision PC軟件進行多功能配置
  • 高測量精度
  • 節省空間的控制柜安裝設計
  • 可調截止頻率

• Description

  The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and bus controller can be integrated into any existing setup. The amplifier 9250 takes signals exactly to the point where they can be combined, monitored and linked efficiently to other data. The fieldbus interfaces give you flexibility, speed and perfect connections, and save you time, money and other resources when integrating your measurement setup with existing systems. Automatic sensor recognition due to burster TEDS lets you play absolutely safe, protecting you from setting incorrect parameters.

  The broad supply voltage range permits operation on standard power supplies used in switch gear cabinets. A highly accurate precision amplifier performs the amplification of the sensor signal being applied. The latest microprocessor technology made a 24 bit AD conversion with high accuracy possible. The sensor excitation is performed by the amplifier module itself so that no additional voltage source is required. It can also be set in steps of 2.5 V, 5 V, 10 V using configuration software DigiVision. The maximum feed current of 40 mA permits parallel connection of several strain gages sensors, e.g. for the addition of measurement variables. Measurement errors brought about by varying line lengths or due to temperature fluctuations effecting the sensor cable are avoided by having probe lines measuring the actual feed voltage directly on site at the sensor itself (6 wire technology). The cut-off frequency of the amplifier can be switched between 10 Hz and 1 kHz

• Downloads

  Data sheet

  9250資料參數

  中

  9250資料參數

  英

  Data sheet

  9250使用手冊

  英

• LINKS & CAD DATA