篤摯儀器（上海）有限公司
篤摯儀器（上海）有限公司
閱讀：190發布時間：2022-10-19
日本奧林巴斯探傷儀 — 接觸式探頭
The Panametrics-NDT Microscan transducers are frequently used with the Series 25 and Series 35 thickness gages, as well as other commercially available thickness gages, flaw detectors and ultrasonic instrumentation.
Microscan transducer part numbers reflect the connector designation:
RM = Right Angle Microdot®
SM = Straight Microdot
RB = Right Angle BNC
SB = Straight BNC
SU = Straight UHF
When selecting a transducer, please review the chart below or consult the Transducer Frequency Range in the Instruction Manual that was shipped with your gage.
Thickness Gage Model
Transducer Frequency Range
45MG
38DL PLUS
2.0 to 30 MHz
One of the advantages of a Panametrics-NDT Microscan contact transducer is its versatility; a single transducer can cover a broad thickness range in many engineering materials. Contact transducers are constructed with the unique WC-5 wearplate for greater durability and a longer life.
| Frequency (MHz) | Element inches | Diameter mm | Transducer Part Number | Transducer Part Code | ||
| 0.5 | 1 | 25 | M101-SB | U8400017 | ||
| 1 | 1 | 25 | M102-SB | U8400018 | ||
| 1 | 0.5 | 13 | M103-SB | U8400020 | ||
| 2.25 | 0.5 | 13 | M106-RM, M106-SM | U8400023, U8400025 | ||
| 2.25 | 0.5 | 13 | M1036† | U8400019 | ||
| 5 | 0.5 | 13 | M109-RM, M109-SM | U8400027, U8400028 | ||
| 5 | 0.25 | 6 | M110-RM, M110-SM, M110H-RM** | U8400030, U8400031, U8400029 | ||
| 10 | 0.25 | 6 | M112-RM, M112-SM, M112H-RM** | U8400034, U8400035, U8400033 | ||
| 10 | 0.125 | 3 | M1016 | U8400015 | ||
| 20 | 0.125 | 3 | M116-RM, M116-SM | U8400038, U8400039 | ||
| 20 | 0.125 | 3 | M116H-RM* | U8400037 | ||
RM = Right Angle Microdot; SM = Straight Microdot; SB = Straight BNC
†High Penetration Transducer *Use with Holder, P/N 2133 **Use with Holder, P/N 2132
儀表網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼