深圳市金博宇科技有限公司
深圳市金博宇科技有限公司
P5200A,P5202A,P5205A,P5210A,高壓差分探頭
Bandwidths up to 200 MHz
Up to 6000 V Differential (DC + pk AC)
Up to 2300 V Common (RMS)
Overrange Indicator
Safety Certified
Switchable Attenuation
*銷售 P5200A,P5202A,P5205A,P5210A,高壓差分探頭 現貨優質供應的詳細資料：
Tektronix offers a broad portfolio of high-voltage probing solutions that enable users to safely and accuray make floating measurements.
TheTHDP0100 and P5210Ahave the largest differential dynamic range capability from Tektronix, allowing users to safely measure up to ±6000 V. The THDP0100 supports bandwidths up to 100 MHz and slew rates up to 2500 V/ns at 1/1000 gain. These probes are supplied with two sizes of hook tips and have an overrange visual and audible indicator which warns the user when they are exceeding the linear range of the probe.
TheTHDP0200 and P5205Aare active differential probes that are capable of safely measuring differential voltages up to ±1500 V. The probes are effective in making measurements in IGBT circuits such as motor drives and power converters. The THDP0200 supports bandwidths up to 200 MHz and slew rates up to 275 V/ns at 1/250 gain.
TheTMDP0200 and P5202Aare designed for medium-voltage applications with differential requirements up to ±750 V. These probes have lower attenuation ranges and offer better signal-to-noise ratio.
TheP5200Acan be used with any oscilloscope and enables users tosafelymake measurements of floating circuits with their oscilloscope grounded. The P5200A Active Differential Probe converts floating signals to low-voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscope.
WARNING: For safe operation, do not use the P5200A High-voltage Differential Probe with oscilloscopes that have floating inputs （isolated inputs）, such as the Tektronix TPS2000 and THS3000 Series oscilloscopes. The P5200A High-voltage Differential Probe requires an oscilloscope or other measurement instrument with grounded inputs.
The TMDP and THDP Series probes are equipped with the TekVPI®interface which allows smart communication between the oscilloscope and probe. Pushing the probe menu button will launch the probe control menu on the oscilloscope display providing access to all relevant probe settings and controls. These probes are designed to operate on TekVPI®oscilloscopes without requiring the TPA-BNC adapter.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
儀表網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
