8710 / 8711系列電位式位移傳感器

• Features

  • 量程范圍從 0 … 25 mm 到 0 ... 150 mm
  • 非線性度可達 ±0.05 % F.S.
  • 耐用性，使用壽命可達1億次
  • 可調速度。10m/s
  • 驅動無球關節耦合引起的側向力
  • 可選擇集成電纜或插頭連接的形式

• Product data

  型號	8710, 8711
  量程范圍	0...25mm 0...50mm 0...75mm 0...100mm 0...150mm
  信號輸出類型	取決于傳感器激勵供電電壓
  保護等級	IP40
  工作溫度	-30°C...+100°C
  激勵供電電壓	取決于量程范圍
  復位彈簧	無，需機構帶動復位
  具體特征	量程范圍從 0 … 25 mm 到 0 ... 150 mm 非線性度可達 ±0.05 % F.S. 耐用性，使用壽命可達1億次 可調速度。10m/s 驅動無球關節耦合引起的側向力 可選擇集成電纜或插頭連接的形式

• Description

  Displacement sensors models 8710 and 8711 with resistance tracks made of conductive plastic material are designed for a direct and accurate measuring of mechanical displacements. A special ball joint coupling is mountable on both ends of the driving rod. Because of this the sensor may be used free of clearance or lateral forces also with angular or parallel misalignment between sensor and measuring device.

  A special multi-fingered slider provides a good electrical contact also at high adjustment speeds or vibrations.

  Areas of application are:

  • Electromagnets
  • Switch and button deflections
  • Pneumatic cylinders
  • Press-fits (longitudinal press-fits)
  • Hydraulic cylinders
  • Measurements of deformation and bending
  • Length tolerances
  • Feeding paths

  Due to the technology employed in potentiometric displacement sensors, they always operate with a sliding contact system. Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to abrasion and long-term stability.

  The driving rods are guided in long-life, low-friction sliding bearings with close tolerances; this results in highly precise measurements. Lateral forces reduce the service life and can be avoided by using, for instance, ball joint couplings, included in the burster product range.

  Due to the pump effect, the driving rod has double sliding bearings.

  Mounting

  The sensor is mounted at the left and right longitudinal slot by four mounting angles.

  These slots (W = 2.2 mm, D = 1.6 mm) are closed at the side of the electrical connector.

   

   

• Downloads

  Data sheet

  8710/8711參數資料

  EN

• LINKS & CAD DATA