8709系列電位式位移傳感器

外殼直徑12.7 mm，使用壽命：1億次運動，調節速度：10m/s

Features
- 量程范圍從 0 … 25 mm 到 0 ... 250 mm
- 非線性度可達 ±0.05 % F.S.
- 外徑 12.7mm
- 使用壽命1億次
- 調節速度：10m/s
- 自帶線纜1m
- 特殊要求：可根據要求連接球形接頭或法蘭緊固件

Product data

型號	8709
量程范圍	0...25mm 0...50mm 0...75mm 0...100mm 0...125mm 0...150mm 0...200mm 0...250mm
信號輸出類型	取決于傳感器激勵供電電壓
保護等級	IP60
工作溫度	-30°C...+100°C
激勵供電電壓	取決于量程范圍
復位彈簧	無
具體特征	量程范圍從 0 … 25 mm 到 0 ... 250 mm 非線性度可達 ±0.05 % F.S. 外徑 12.7mm 使用壽命1億次調節速度：10m/s 自帶線纜1m 特殊要求：可根據要求連接球形接頭或法蘭緊固件

Description

Potentiometric displacement sensors are used for direct, precise measurement of mechanical displacements. The mechanical parts of the measuring equipment must be set-up in such a way that the sliding shaft can move without play or lateral forces.

A special multi-finger slider ensures good contact even when the adjustment speed is high or in the presence of vibration. With its housing diameter of only 12.7 mm, the model 8709 is also suitable for highly compact structures.

The movable fastening clamps allow the user variable options for attaching the sensor without complication.

Optionally available adaptations, such as flange and ball joint versions, extend and complement the range of possible applications.

Typical fields of application include:
- Measuring the stroke on riveting machines
- Measuring insertion distances
- Offset measurements on bearings
- Spring travel measurements on axes
- Measurements of the movement of hoisting platforms
- Length measurements on pipe bending machines
Due to the technology employed in potentiometric displacement sensors, they always operate with a sliding contact system. Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to abrasion and long-term stability.

The driving rods are guided in long-life, low-friction sliding bearings with close tolerances; this results in highly precise measurements. Transverse forces reduce the service life and can be avoided by using, for instance, ball joint couplings.

Due to the pump effect, the driving rod has double sliding bearings. All the figures quoted in the data sheet for nonlinearity, service life, reproducibility and temperature coefficient apply to the use of the sensor as a voltage divider with a maximum current of 0.1 µA.

A ball joint coupling (see accessories) at the end of the sliding shaft minimizes axial errors between the sensor and the equipment.
Downloads

Data sheet

8709參數資料
EN
LINKS & CAD DATA