ZDF氮封裝置
ZDF Nitrogen Sealed Unit
ZDF 系列氮封裝置是本公司自主開發、研制的一套自力式微壓力控制系統，主要用于保持容器頂部保護氣（一般為氮氣）的壓力恒定，以避免容器內物料與空氣直接接觸，防止物料揮發、被氧化，以及容器的安全。特別適用于各類大型儲罐的氣封保護系統。該產品具有節能、動作靈敏、運行可靠、操作與維修方便等特點。廣泛應用于石油、化工等行業。
氮封裝置供氮、泄氮壓力設定方便，可在連續生產的條件下進行。壓力檢測膜片有效面積大，設定彈簧剛度小，動作靈敏，裝置工作平穩；
為確保儲罐的安全，需在罐頂設置呼吸閥，呼吸閥僅起安全作用，避免了常規氮封裝置中（供氮閥和泄氮閥啟閉頻繁易損壞的缺陷）；
The ZDF series of nitrogen sealed unit is the independently developed by our company.It is an independent pressure control system mainly used in maintaining the constant pressure of protective gas(typically nitrogen) the top of containers to prevent the materials from being volatilized and oxidized because if the direct contact with air,ａnd protect the safety of containers.It is particularly applicable to all types of large scale storage tank gas seal protection systems.The product has the advantages of energy saving,flexible action,reliable running,convenient operation and repair etc.As a result,ti is widely used in petroleum,chemical and other industries.
The nitrogen sealed unit is convenient for the nitrogen supply and nitrogen pressure relief setting,ａnd the operation can be done in the condition of continuous area,small spring stiffness,flexible action and stable device work.
The breather valve shall be equipped to ensure the safety of the tank.the breather valve only has the function of ensuring safety and it can avoid the damage caused by the frequent opening and closing of nitrogen valve and vent nitrogen valve.
標準規格(Standard specifications)
形式Type | 氮封裝置Nitrogen Sealed Unit |
公稱通徑Body Size | DN15-DN200(1/2~18) |
公稱壓力Body Ratings | PN10,16,20,25,40,50,64 ANSI 150#、300# |
閥體及閥蓋材質 Body&Bonnet Material | WCB,CF8,CF8M,CF3,CF3M,WC1,WC6,WC9,LCB,LCC,LC3,哈氏C… |
填料Packing | V型聚四氟乙稀 V-PTEE/柔性石墨 Flexible graphite |
墊圈Gasket | GRAP+304,GRAP+316,PTEE |
連接方式Connections | 法蘭型（RF、MFM）Flange type(RF,MFM)/焊接型（SW、BW）Welding type(SW,BW) |
涂層Painting Color | 棕色漆Brown painting/不銹鋼閥體可不涂漆No painting on stainless steel valve body |
壓力調節范圍 Pressure regulating scope(KPa) | 0.1~0.3 0.2~0.35 0.3~0.5 0.4~5.5 5~15 6.5~20 10~30 15~40 25~50 40~80 等（高壓及特殊調節范圍根據實際情況定high pressure and special regulating scope shall be decided according to practical situations） |
注：以上只是標準組合，根據工況條件，本表以外的規格也是可能的。
Note:the above is just a standard combination,according to the working conditions,other specifications are also possible.
