密閉采樣器/密閉式取樣器（瑞士） 型號:HH10/Sampler GTX CHEM 30m/100ft

庫號：M283760   查看hh

密封的取樣器CHEM

技術規格:
儲罐大壓力：0,3 bar, 4,4 psi
單位高度：800 mm
重量：5.3 kg
卷尺長度：30m, 100ft
取樣瓶：0.5L
全氟醚橡膠墊片適用于任何液體
材質：不銹鋼AISI 316, PTFE, PVDF, FFKM

連接在2英寸的緊湊的閥門采樣期間沒有氣體釋放
典型的樣品
適用于低或高粘性液體


The HH10/Sampler GTX CHEM 30m/100ft is dedicated to applications where closed sampling is required and a sample of approx. 0,5 litre of liquid is needed. The transfer of the liquid from the sampling bottle to a laboratory bottle occurs by overpressuring the upper chamber of the sampler with a pump.

- Easy installation on 2 Inch vapour control valves with quick connect coupling
- The sampling height can be read on the graduated tape
- After sampling, the liquid can be transferred into a laboratory bottle by opening the transfer valve and actuating the pressure pump.
- The sampler is delivered with a zone sampling bottle if not otherwise specified. Additional spot, bottom or running - sampling bottles are available
- Its very light construction facilitates its transport and handling
- Very easy to clean
- Low investment cost
- Fully compatible with non corrosive and corrosive liquids
- Special design for use on 2 Inch Compact Valves exclusively

Technical specifications :

Maximal tank overpressure : 0,3 bar, 4,4 psi
Unit height : 800 mm
Weight : 5.3 kg
Tape length : 30m, 100ft
Capacity of zone sampling bottles : ~0,5 l


HH10/Sampler GTX CHEM 30m/100ft
With FFKM gaskets for operation in all kind of liquids
Materials : Stainless Steel AISI 316, PTFE, PVDF, FFKM

For connection on 2 Inch Compact valves exclusively
No gas release during sampling
Representative sample
For low or high viscous liquids