鄂式閘門適用于堆比重≤ 2.5t/m 3 的各類礦石、煤炭、焦炭、灰渣、化工產品等散狀物料，廣泛應用于建材、冶金、化工、玻璃等行業的倉底卸料。
The valve is widely used in building material, metallurgy, chemical and glass industries etc to discharge at the bottom of storage. It is suitable for loosing material whose conglomeration specific gravity is less than 2.5t/m 3 such as all kinds of ore, coal, coke, dust slag and chemical product.
結構特點：
Structure characteristic:
鄂式閘門采用優質碳鋼焊接成形，結構，運行靈活可靠，無卡阻現象。配用不同的傳動裝置能滿足不同的工況需要。電動鄂式閘門采用帶有超載保護裝置的電動推桿，可避免燒壞電機，可以遠距離操縱或程序控制，往復行程可以精確調節位置自鎖。電液動鄂式閘門采用電液推桿，全液壓傳動，推拉力均可實現無級調速。氣動鄂式閘門采用氣動推桿，通過配件組合可以遠距離操縱或現場控制。 SEF為手動，DEF為電動，YEF為電液動，QEF為氣動。
The valve is welded in fine steel, having the features of peculiar structure, non-obstruction, reliable and flexible operation. It can meet different working condition equipped with different transmission devices. The electric draw stem is equipped with overload protector, which can avoid damage of motor. Program or remote handling can control the electric jaw valve. Reciprocating stroke can adjust position self-locking precisely. The electric hydraulic jaw valve adopts electric hydraulic draw stem and full hydraulic transmission. Thrust and pull can realize stepless velocity modulation. Pneumatic jaw valve adopts pneumatic draw stem and it can control remotely or in local equipped with fittings grouping. SEF denotes manual, DEF denotes electric, YEF denotes electric hydraulic and QEF denotes pneumatic driving.
性能參數：
Performance parameter:
適用溫度 Suitable temperature | 堆集比重 Conglomeration specific gravity | 適用介質 Suitable medium |
≤ 300 ℃ | ≤ 2.5t/m 3 | 晶料固體、煤炭、焦炭、灰渣、化工產品及各類礦石 Crystal, coal, coke, dust slag, chemical product and all kinds of ore |
傳動裝置參數：
Transmission device parameters:
規 格 Type | 200 | 300～400 | 500～600 | 700～800 | 900～1000 |
閘門適合負荷 (Kg) Suitable loading | 89 | 185～240 | 470～770 | 1130～1720 | 2110～2950 |
電動推桿 Electric draw stem | DT Ⅰ A300M P ： 0.37KW | DT Ⅰ A500M P ： 0.75KW | DT Ⅰ A700M P ： 0.75KW | DT Ⅰ A1000M P ： 1.1KW | DT Ⅱ A1600M P ： 2.2KW |
電液動推桿 Electric hydraulic draw stem | DYT300 P：0.37KW | DYT450 P：0.55KW | DYT700 P：0.75KW | DYT1000 P ： 1.1KW | DYT1500 P ： 1.5KW |
氣動推桿 Pneumatic draw stem | 10A-5V CA 80B | 10A-5V CA 100B | 10A-5V CA 125B | 10A-5V CA 160B | 10A-2-5V CA 200B |
外形圖 ：
Appearance figure ：
外形連接尺寸：
Appearance joint dimensions:
A × A | B × B | C × C | b | E | F | n-d | H | N | M | Ф |
200 × 200 | 245 × 245 | 280 × 280 | 6 | 90 | 350 | 8- Φ 12 | 280 | 260 | 320 | 26 |
300 × 300 | 355 × 355 | 400 × 400 | 8 | 100 | 400 | 12- Φ 12 | 300 | 260 | 320 | 26 |
400 × 400 | 455 × 455 | 500 × 500 | 8 | 120 | 460 | 16- Φ 14 | 360 | 260 | 320 | 26 |
500 × 500 | 555 × 555 | 600 × 600 | 10 | 150 | 510 | 20- Φ 14 | 480 | 260 | 320 | 26 |
600 × 600 | 655 × 655 | 700 × 700 | 10 | 180 | 560 | 20- Φ 14 | 600 | 260 | 320 | 26 |
700 × 700 | 755 × 755 | 800 × 800 | 12 | 220 | 610 | 20- Φ 14 | 660 | 420 | 360 | 32 |
800 × 800 | 855 × 855 | 900 × 900 | 12 | 240 | 660 | 24- Φ 14 | 760 | 420 | 360 | 32 |
900 × 900 | 955 × 955 | 1000 × 1000 | 14 | 280 | 720 | 24- Φ 14 | 900 | 420 | 360 | 32 |
1000 × 1000 | 1070 × 1070 | 1130 × 1130 | 14 | 350 | 880 | 28- Φ 18 | 1040 | 420 | 360 | 32 |
工作原理：
Working principle
鄂式閘門由本體、扇形閘板、軸、齒輪、密封副、執行機構等部件構成。手動或執行機構推動搖桿，使齒輪帶動扇形閘板沿軸心旋轉，使兩個扇形閘板向兩邊開啟，物料隨即下落，待接料裝置滿載后，再由執行機構帶動搖桿，使扇形閘板復位，關閉截斷下落的物料。
The valve is made up of body, sector gate, axle, gear, sealing pairs and actuator etc. when the rocker is driven by hａnd or the actuator device, it will drive the gear to make the sector gate rotate and open, then material drop. When the loader is full, the actuator will drive the rocker to replace the sector gate, and then the falling material will be cut off.
使用說明：
Usage explanation
• 安裝時請注意閘門本體上標明介質流向。兩法蘭連接時必需加密封墊片，然后均勻鎖緊螺栓。
• 運行時請辨清扇形閘板開關方向，執行機構請正確接線。
• 運行時請定期給各傳動部位加潤滑油。
• Pay attention to the flow direction of medium marked on the body. Add the sealed shim between the two flanges and then screw down the bolt.
• Pay attention to the open-close direction of the gate when operate. The actuator must be wired exactly.
Add lubricant to the transmission parts regularly as it runs.
