產品簡介 Brief product introdution
預制分支電纜是一種新型的預制型建筑配電電纜,它廣泛應用于住宅樓、辦公室、賓館、醫院、橋梁、工廠、礦井、
地鐵、隧道等供電系統。該產品根據具體建筑的結構特點和配電要求,將主干電纜、分支電纜、分支聯接體等三部分進
行一體化設計,采取工廠預制的方式,是普通電纜的和母線槽理想的更新換代產品,在工程的經濟性、技術性和安
裝簡便性有突出的優點。
Perfab branch cable,which is one kind of new prefab structural distribution cables,is widely used in the distridution
of residential building,office building,hotel,hospital,bridge,factory,minging,subway,tunnel,and so on.The cable combined
the trunk cable,branch cable,and branch joint into one according to the framewcrk characteristic and distribution demand
of the idiographic structure.Adopted factory prefab way,it is ideal substitute for gener al cable and generatrix trough.
It has outstanding advantages in economical engineering,advanced technique and convenient&simple intallation.
FDZ系列預制分支電纜的品種、型號 Breed,Type of FDZ Series Prefabricated Branch Cable
可選用電纜(均為銅導體)的型號有: Optional variety and specifications of cable: | |
YJV | 交聯聚乙烯絕緣聚氯乙烯護套電力電纜 XLPE insulated and PVC sheathed power cable |
Z R-YJ V | 交聯聚乙烯絕緣聚氯乙烯護套阻燃電力電纜 XLPE insulated and PVC sheathed flame retardant power cable |
NH-YJV | 交聯聚乙烯絕緣聚氯乙烯護套耐火電力電纜 XLPE insulated and PVC sheathed slow-burning power cable |
Vv | 聚氯乙烯絕緣聚氯乙烯護套電力電纜 PVC insulated and sheathed power cable |
ZR-VV | 聚氯乙烯絕緣聚氯乙烯護套阻燃電力電纜 PVC insulated and sheathed flame retardant power cable |
ZH-VV | 聚氯乙烯絕緣聚氯乙烯護套耐火電力電纜 PVC insulated and sheathed slow-burning power cable |
GWDZ-, WDZA-, WDZAN-WDZAN | 新一代聚氯乙烯護套低煙、低毒、無鹵電力電纜 new generation PVC sheathed low-smoke low-poision no-halogen power cable |
G | 隔氧層系列分支電纜 oxygen series cable |
注: Notes:
1.未做特別說明時,電纜額定電壓 (Uo/U) 均為 0.6/1KV 銅導體單芯低壓電力電纜。
2.主干電纜均采用黑色護套電力電纜。
3.分支電纜無特別說明時,均采用與主干電纜同型號的電力電纜。
4.分支電纜若要求采用色標(黃、紅、綠、淺藍、黃綠)的 BV-500 型電線,應在訂貨時詳細說明。
1.The cable is single core cooper cable with 0.6/1 kv rated voltage(Uo/U)without special induication.
2.The main cable are electric ones applying black protection cover.
3.Without special indication,the branch cable all apply the same type of electric ones as the main cables.
4.1f the branch cable requires model BV-500 wire with colour marks(yellow,red,green,light,blue,yellow/green).It should be specified during.
FDZ系列預制分支電纜的主要性能 Main properties of FDZ Series Prefabricated Branch Cable
1、絕緣電阻 ≥200M Ω Km;
2、絕緣耐壓 3.5KV/5min 不擊穿;
3、良好氣密性與防水性,即將分支接頭浸入水中,在水與電纜芯之間測量絕緣電阻和工頻耐壓均應符合1和2的要求。
4、分支接頭的接觸電阻的小,接觸電阻與等長的分支線的基準電阻之比值 ≤1.2;
5、接頭短路強度大,短路后接觸電阻比率的變化率 ≤0.2;
6, ZR-YJV型阻燃預制分支電纜,護套的自熄時間 ≤12s,符合 GB12666.5 的要求。
7, NH 耐火型電纜除了能在正常的工作條件下供電外,也能在燃燒情況下,保持 90min 的正常運行,符合 GB12666.6 的要求。
8,VV型電纜的銅芯的工作溫度為70°C,YJV型電纜的銅芯的工作溫度為90°C ;
9、具有優良的耐腐蝕性,能抵抗無機鹽、油、堿、酸和有機溶劑對它的腐蝕;
10, YJV型預制分支電纜具有優良的熱穩定性和抗老化性;
11, GWDZ-,WDZA-,WDNA-,WDZAI-,清潔型預制分支電纜具有低煙、低毒、無鹵、耐火等性能。
12, GZR-YJV 隔氧層系列分支電纜。具有高阻燃、耐火性能,阻燃性能超過阻燃標準A類。
1 .Insulation resistance ≥200MΩ
2.Insulation withstand voltage ≥3.5kv/5min;
3.Excellent air tightness and water proofing quality.When immerge branch joint water,measured insulation resistance between water and cable core,and power frequency withstand voltage meet the requirement of items 1 and 2;
4.Little contact resistance of branch joint.The ratio value of contact resistance resist ance of equal length branch lin if equal to or less than 1.2;
5.Large joint short circuit strength.The variation rate of contact resistance ration after shart circuit is equal to or less than 0.2;
6.For ZR-YJV typeflame-retarded prefabricated branch cables,self extinguishing time ofjacker is equal is equal to or less than 12s and meets GB12666.5;
7.Besides power supply in normal working condition NH fire resistance type cable can reamin normal operation foe 90min uder burning condition and meets GB12666.6;
8.Max.working temperature of copper core of VV type cable is 70°C and that of YJV type cable 90°C;
9.With excellent corrosive resistance,it can keep from eroding of inorganic salt,oil,base,acid.organic solution,and so on;
10.YJV type prefabricated branch cable has excellent themal stability and aging resistance;
11.GWDZ-,WDZA-.WDNA-,WDZAN-clean-type precast branch cable possessed the features such as low smoke,lowtoxic,non-halogen and fire resistance etc;
12.GZR-YJV oxygen barrier branch cable with high flame retardance and fire resistance which exceeds Antifaming Stamdard A class.
FDZ系列預制分支電纜的主要優點 Main features of FDZ series prefabricated Branch Cable
具有優良的供電安全可靠性
1、主干電纜導體無接頭,連續性好,減少了故障點。
2、分去接頭采用工廠全程機械化操作,大大降低了人為因素造成的質量不良現象。
3、分支接頭結構合理并采用的LYZ工藝制作,接觸電阻極小,不受熱脹冷縮影響。
4,短時間內完成壓膜護套,避免了接頭接觸處銅芯長時間裸露在空氣中產生氧化而導致接觸電阻變化。
5、分支接頭有嚴格的技術標準和檢驗要求,以及嚴密的質保體系
安裝簡便環境要求低,施工方便
1、占用建筑面積小,有利于建筑面積的有效使用,對土建的空間尺寸五要求。
2、使用環境要求低,安裝精度要求低。
3、安裝簡單方便,安裝技術要求不高,安裝設備僅需一臺普通卷場機即可。且安裝周期短,僅為母線槽安裝工時的1/10或1 /20。安裝勞動強度小。
4、由于它的彎曲半徑小,大大的降低了安裝難度和縮小了空間尺寸。
優良的抗震性、氣密性、防水性和耐火性
1、優良的抗震性,一般機械連接母線槽接頭,在墻體受震動后會發生接頭松動,而本公司開發的預制分支電纜不會受到影響。特別在通過建筑沉降縫時不需要任何措施。
2、良好的氣密性和防水性,能在潮濕的環境中正常供電,也能在露夭及埋地敷設使用,但母線槽不能做到。
3、采用“NH”型的預制分支電纜,可在燃燒情況下,保持90min的正常供電運行。
免維護
1、預制分支電纜按規定方法安裝后,一次性開通率高。
2、正常運行的預制分支電纜系統平時不需要作任何維護保養,故障率為零
可明顯降低配電成本
1、與線線槽相比,降低工程造價,且技術經濟指標高,綜合經濟效益顯著。
品種規格多,選用靈活,任意組合
1、主電纜從10mm2 到 1200mm2,分支電纜從4mm2 到 300mm2任意組合選用。
2、電纜品種多,有 VV、 ZR-VV、NH-VV、YJV、ZR-YJV、NH-YJV、SC1A-CE、SC3A-CV、SC1-FPB-CE、SC3-FPB-CV、GZR-YJV.、GDL-YJV、GWL-YJV、GWL-YJE、GNH-YJV、GNH-YJE等,可根據需要選用。
3、分支接頭可根據樓層需要任意設定分支位置。
型號示范: Model demonstration
舉例 1
主干電纜表達為:FDZ-ZR-YJV-4 (1x1000)
分支電纜表達為:FDZ-ZR-YJV-4 (1x630)
或表達為:FDZ-ZR-YJV-4 (1 X 1000)/4(1X630)
舉例 2
主干電纜表達為:FDZ-NH-YJV-4(1x1000)+ PE(1x630)
分支電纜表達為:FDZ-NH-YJV-4(1x630)+ PE(1x300)
或表達為:FDZ-NH-YJV-4(1x1000)+ PE(1 x630)/(1x300) + PE(1 x50)
技術參數 Technology Parameters
單芯電纜規格(mm2) Single core cable specs | 10~25 | 35~70 | 95~185 | 240~400 | 500~63 | 800~1000 |
L尺寸(mm) Size of L | 120 | 125 | 125 | 150 | 175 | 185 |
多芯電纜規格(mm2) Multi-core cable specs | 10~35 | 50~70 | 95~120 | 150~240 |
L尺寸(mm) Size of L | 280 | 320 | 400 | 500 |
《0.6/1 kv單芯XLPE/PVC電力電纜參數》 parameters of 0.6/1 kv single core XLPE/PVC cable
《0.6/1 kv單芯PVC/PVC電力電纜參數》 parameters of 0.6/1 kv single core PVC/PVC cable
《預制分支電纜安裝示意圖》 Installation diagram of precast branch cable
《預制分支電纜設計選型要求》 Model Selection Requirements of Precast Branch Cable Design
《FDZ系列預制分支電纜對土建的設計要求》 Design requirement to building project for FDZ series precast branch cable
訂貨須知 Notes to order
為了提供符合貴工程的FDZ系列預制分支電纜,請提供下列資料:
1、主干電纜和各分支電纜的型號、規格、長度;
2、分支聯接體離樓面的高度及布置;
3、配電系統圖:電壓等級、單相雙線、單相三線、三相三線、三相四線、三相五線;
4、附件:托掛架、起吊掛具、固定夾具等;
5、樓層開孔尺寸;
6.茸他需要說明的項目。
In order for us to supply FDZ series pre0cast branch cable that meeting the requirement so your project,please provide the following documents:
1.The type,specification,length of the trunk cable and each branch cables.
2.The height and collocation of branch joint from the building surface.
3.Distribution system diagram:voltage grade,single-phase double-wire,sing-phase three-wire,three-phase three wire,three-phase four wire,three-phase five wire.
4.Component:holding and hanging rack,rising hanging tool.Fixed clamp,etc.
5.Floor hatch dimension.
6.Other items needs indicated.