深圳市鑫成通電子有限公司優價提供便捷式IP網絡分析儀MD1231A1，The MD1231A1 is a compact measuring instrument supporting interface modules from 10 Mbit/s to 10 Gbit/s. Since the main unit has two slots, it can be used for measurement of either sixteen 10/100 Mbit/s Ethernet ports or two 10 Gbit/s Ethernet ports at one time.
The MD1231A1 has a full complement of maintenance measurement functions ranging from analysis of Gigabit auto-negotiation to network monitoring with a time resolution of 1 ms. These functions are extremely useful for on-site troubleshooting.

Main Specifications:

Indicator LCD 8.4in. Color TFT, SVGA (800 x 600)
LED Power, HDD, Remote, Panel Lock
OS Windows® 98 Second Edition Embedded
Storage Unit HDD and 3.5in. FDD
Interface GPIB, Ethernet (RJ-45), USB1.1 x 2 ports, Keyboard (PS/2), GPS antenna
Trigger Trigger Input: for APS test and Frame Capture
Trigger Output: Capture Trigger
Level: TTL (active HIGH)
Connector: SMB (75 ohm)
Unit Sync.
Input/Output Time Synchronization for MD1230 Family
Level: TTL
Connector: SMB (75 ohm)
DCS Input -
Remote Control Remote control using LAN (10BASE-T/100BASE-TX) with MX123001A
Remote commａnd control with GPIB (Opt02) or LAN (10BASE-T/100BASE-TX, Opt03/Opt06)
Input Device Pointing Device
Power AC 85 to 132 V/170 to 250 V (100/200 V system automatic change), 47.5 to 63 Hz
Power Consumption Less than 330 VA
Operational Temperature 0 to +40°C (except when FDD is active.)
Dimensions and Mass 320 (W) x 100 (H) x 300 (D) mm,
Less than 6 kg (excluding option and plug-in modules)
EMC EN61326: 1997/A2:2001 (Class A), EN61000-3-2: 2000 (Class A), EN61326: 1997/A2:2001 (Annex A)
LVD EN61010-1: 2001 (Pollution Degree 2)
Number of Slots 2
Corresponding Modules MU120101A: 10M/100M Ethernet Module, MU120102A: Gigabit Ethernet Module, MU120103A: 2.5G (1.31) Module, MU120103B: 2.5G (1.31) Module, MU120104A: 2.5G (1.55) Module, MU120104B: 2.5G (1.55) Module, MU120105A: 10G (1.31) Module, MU120106A: 10G (1.55) Module, MU120111A: 10/100M Ethernet Module, MU120112A: Gigabit Ethernet Module, MU120118A: 10 Gigabit Ethernet Module, MU120118B: 10 Gigabit Ethernet Module, MU120118C: 10 Gigabit Ethernet Module, MU120119A: OC-3/12 STM-1/4 Module (1310 nm), MU120120A: OC-3/STM-1 Module (1310 nm)
Corresponding Options *1 MD1231A1-02: GPIB Control *2, MD1231A1-03: Ethernet Control *2 MD1231A1-04: MD1231A1 Decode Module *3, MD1231A1-05: GPS Module *4 , MD1231A1-06: Tcl Interface *5, MD1231A1-07: OSPF Protocol, MD1231A1-08: MPLS (LDP/CR-LDP) Protocol, MD1231A1-09: MPLS (RSVP) Protocol, MD1231A1-10: RFC2889 Benchmarking Test, MD1231A1-11: Packet BER Test, MD1231A1-12: IPv6 Expansion, MD1231A1-13: XENPAK Test, MD1231A1-14: IGAP Protocol, MD1231A1-15: Auto Negotiation Analysis, MD1231A1-16: Link Fault Signaling, MD1231A1-18: OSPFv3 Protocol *6, MD1231A1-19: BGP4 + Protocol *6, MD1231A1-20: Application Traffic Monitor, MD1231A1-21: PIM-SMv2 Protocol *7, MD1231A1-22: MLDA Protocol *6, MD1231A1-23: Spanning Tree/Ling Aggregation, MX123002A: MD1230A Expert Analysis Module *8
*1: Some of these interface modules may not work in certain combinations depending on the modules and software versions. Please see the selec-tion guide (pages 4, 5).
*2: The MD1231A1-02/03 options are required only for remote control using GPIB commands. Note that these options may be installed together, although only one of them can be used at a time.
*3: Purchase MD1231A1-04 and the operation manuals (W2107AE) on CD-ROM. Printed versions sold separately.
*4: An accessory GPS antenna (with a 5 m cable) is bundled together with the module.
*5: MD1231A1-06 is the option to operate the Tcl server. MD1231A-06 can be mounted together with MD1231A1-03, but both options cannot be operated at the same time because they are controlled via Ethernet.
*6: MD1231A1-12 IPv6 Expansion is required.
*7: This module can operate independently when used for an IPv4 network. When this module is used for an IPv6 network, MD1231A1-12 IPv6 Expansion is required.
*8: MD1231A1-04 MD1231A1 Decode Module is required.