產品概述
一般壓力表適用于測量無爆炸危險、不結晶、不凝固及對銅及銅合金不起腐蝕作用的液體、蒸汽和氣體等介質的壓力。
該儀表采用威卡旋入式外殼，標準銅棒制作的接頭，加寬尺寸的彈簧管和全銅反裝機芯，并加大了連桿等各連接件的強度，所有緊固件均采用不銹鋼螺絲。校準和檢驗過程采用先進的設備和工藝以保證產品的精度，所以該儀表外觀精美，示值精度高，輕敲位移小，重復性能好，使用壽命長。
主要技術指標
測量范圍：0.6～2.5MPa
精確度等級：1.0級
使用環境條件：-40～70℃，相對濕度不大于85%。
溫度影響：使用溫度偏離20±5℃時，不大于0.4%/10℃。
重量：0.44kg
安裝螺紋：M20×1.5（特殊要求可訂制）
外形尺寸：
（見附圖）
Y series nomal pressure gauge
Brief Introduction
The nomal pressure gauge is well suited fore measuring those gases or liquids
Which will neither expiode,nor crysallize,nor corrode or copper alloys.
The meter adopts Wika screw-in type case, standard copper bar connector, bigger size bourdon tube and anti-installed copper machine core, meanwhile we increased the intensity of connection and all the fastener are stainless steel screws.To ensure the meter’s precision ,our calibration and checking procedures are adopting the International advanced equipment and technology.The meter has attractive appearance , high precision, small friction error, good reproducibility and long working life.
Main Technology Data
Measuring range:0.6～2.5MPa
Accuracy:1.0
Environment condition:-40～70℃,relative humidity is no more than 85%.
Temperature influence:when the environment temperature deviate from 20±5℃,the additional error no more than 0.4%10℃.
Weight:0.44kg.
Coneect type:M20×1.5 or special type.
Overall Dimensions
