電纜套管耐燃性測試儀-智能型-GB/T 20041.1-2015

Cable Sleeve Flame Retardant Tester 

產品介紹

泰思泰克電纜套管耐燃性測試儀是根據國標GB/T 20041.1-2015要求研制的，用于測試非金屬和復合導管的耐熱性能。

產品型號 Model：TTech-GBT20041

符合標準：

GB/T 20041.1-2015 電纜管理用導管系統 *部分：通用要求

主要特點Main features ：

1、 觸摸屏智能控制系統；中英文操作界面

Touch-screen control system/English operation interface (optional)

2、 系統自動點火，自動計時，數據自動存儲；

The system auto-ignition, automatic timing, automatic data storage and are free to print test report;

3、 試驗部分和控制部分組成采用一體化設計，方便現場安裝和調試。

Test and control components using integrated design, convenient installation and debugging.

4、 不銹鋼測試箱體，內部腔體高度為1300mm，寬度300mm，深度為450mm；

Stainless steel Cabinet, internal Chamber height for 1300mm, width 300mm mm, depth of 450mm;

5、 兩根不銹鋼鋼桿，穿孔加螺栓固定單根電線電纜或光纜試樣；

Two stainless-steel rod, perforation and bolted on a single wire cables or cables sample;

6、 燃燒器為預混合型，內徑為￠12±0.5mm，長約100mm。1KW混合型標準燃燒器，可提供精準測試火源；控制箱配備壓力表、減壓閥、轉子流量計及切斷球閥；

Burner for premixed type, diameter DIA 12 ± 0.5mm, CA 100mm. 1KW standard burner hybrid, can provide accurate test fire; the control box is equipped with pressure gauge, pressure relief valve, rotor flowmeter and cuts off the ball valve;

7、 控制箱體內部配備氣體單向閥，提供更多的安全保證；

The gases inside the control box is equipped with a one-way valve, provide more security assurances;

8、 火焰施加時間及持燃時間可在0～99分99秒范圍內調節。試驗過程自動控制。

Flame flame application time and hold time can be adjusted in the range of 0~99 and 99 seconds. Test process automation.

9、 進口針閥精確調節火焰高度，按標準要求藍色火焰50mm~60mm, 總高170mm~190mm

Needle valve adjust flame height, required by the standard blue flame 50mm~60mm, total height 170mm~190mm;

10、 進口針閥控制氣體流量：丙烷650ml/min ±30ml/min;空氣10L/min±0.5ml/min.

Inlet needle valve controlling gas flow: ± 30mL/min propane 650ml/min air 10L/min ± 0.5ml/min.

11、 進口品牌氣體壓力表及調壓閥，精確控制氣體壓力；

Imported brands of gas pressure gauges and pressure regulator, precise control of air pressure;

12、 配有火焰高度卡尺。

 flame height gauges; 

13、 帶燃氣流量計及壓力調節；自動點火。

With gas flow meter and pressure control; automatic ignition.

14、 噴燈角度45°，0°可調。

Torch angle 45 °, 0 °, adjustable;

15、火焰校驗裝置為選配;熱敏打印機為選配。

 Flame check device is optional.

-通風櫥一體機-GB/T 20041.1-2015

Cable Sleeve Flame Retardant Tester 

產品介紹

泰思泰克是根據國標GB/T 20041.1-2015要求研制的，用于測試非金屬和復合導管的耐熱性能。

產品型號 Model：TTech-GBT20041-1

符合標準：

GB/T 20041.1-2015 電纜管理用導管系統 *部分：通用要求

主要特點Main features：

1、觸摸屏智能控制系統；

Touch-screen control system/English operation interface (optional)

2、系統自動點火，自動計時，數據自動存儲；

The system auto-ignition, automatic timing, automatic data storage and are free to print test report;

3、試驗部分和控制部分組成采用一體化設計，方便現場安裝和調試。

Test and control components using integrated design, convenient installation and debugging.

4、全不銹鋼箱體，內部腔體高度為1300mm，寬度300mm，深度為450mm；

Stainless steel Cabinet, internal Chamber height for 1300mm, width 300mm mm, depth of 450mm;

5、兩根不銹鋼鋼桿，穿孔加螺栓固定單根電線電纜或光纜試樣；

Two stainless-steel rod, perforation and bolted on a single wire cables or cables sample;

6、燃燒器為預混合型，內徑為￠12±0.5mm，長約100mm。1KW混合型標準燃燒器，可提供精準測試火源；控制箱配備壓力表、減壓閥、轉子流量計及切斷球閥；

Burner for premixed type, diameter DIA 12 ± 0.5mm, CA 100mm. 1KW standard burner hybrid, can provide accurate test fire; the control box is equipped with pressure gauge, pressure relief valve, rotor flowmeter and cuts off the ball valve;

7、控制箱體內部配備氣體單向閥，提供更多的安全保證；

The gases inside the control box is equipped with a one-way valve, provide more security assurances;

8、火焰施加時間及持燃時間可在0～99分99秒范圍內調節。試驗過程自動控制。

Flame flame application time and hold time can be adjusted in the range of 0~99 and 99 seconds. Test process automation.

9、進口針閥精確調節火焰高度，按標準要求藍色火焰50mm~60mm, 總高170mm~190mm

Needle valve adjust flame height, required by the standard blue flame 50mm~60mm, total height 170mm~190mm

10、進口針閥控制氣體流量：丙烷650ml/min ±30ml/min;空氣10L/min±0.5ml/min.

Inlet needle valve controlling gas flow: ± 30mL/min propane 650ml/min air 10L/min ± 0.5ml/min.

11、進口品牌氣體壓力表及調壓閥，精確控制氣體壓力；

Imported brands of gas pressure gauges and pressure regulator, precise control of air pressure;

12、配有火焰高度卡尺。

Flame height gauges 

13、帶燃氣流量計及壓力調節；自動點火。

With gas flow meter and pressure control; automatic ignition.

14、噴燈角度45°，0°可調。

Torch angle 45 °, 0 °, adjustable.

15、火焰校驗裝置為選配;熱敏打印機為選配

Flame check device is optional.