YE-330.FG.200矩形膜盒差壓指示儀是用來測
量非腐蝕性氣體的差壓值、壓力值及真空值的;配
合節(jié)流裝置也可測量管路中氣體的流量。儀表有流
量和差壓兩種刻度可按需要選用。該儀表可掛式安
裝,具有體積小,重量輕,工作可靠,使用方便等
特點。
主要技術指標:
1、型號:壁掛式
2、工作環(huán)境:溫度+ 5℃~+ 50℃相對濕度不大于 85%,無強烈振動,無腐蝕性氣體的場合。
3、工作壓力:≤ 0.1MPa
4、精度等級:2.5級
5、測量范圍:
YE-330.FG.200矩型膜盒差壓指示儀
Rectangle capsule differential pressure indicator
Specification:
1、Model:Wall-Mounted
2、Ambient temperature:Temperature+ 5℃~+ 50℃,relative temperature less than 85%,there is no vio-
lent vibration and corrosive gas in the environment.
3、Operation Pressure:≤ 0.1Mpa
4、Accuracy:Class 2.5
5、Range:
PP
·
PM
北 京 布 萊 迪 儀 器 儀 表 有 限 公 司
PM ·09 - 2
結構及工作原理:
儀表由壓力平衡閥、膜盒腔部分、指示部分、機械傳動部分組成。
儀表的工作原理是三閥組將高壓和低壓氣體分別引入密封膜盒腔和彈性元件膜盒內, 使膜盒內外受到不同的
壓力,從而得出壓力差,即△P。在△P的作用下使膜盒的自由端產生一個正比于差壓值的位移量,該位移借助
連桿并經連桿傳動機構的傳動及放大作用, 由固定于指針軸的指針將被測差壓值在刻度板上指示出來。 如單獨測
量正壓或負壓則通過平衡閥關閉和接通連接來完成(后附說明)
Structure and operation principle:
The instrument is composed of equilibrated valve、capsule cavity, indication part and mechanical drive part.
The operation principle of the instrument is to lead low pressure and high pressure gas into airproof capsule cavity
and elastic-element capsule by three valve manifold, to transmit different pressure to the inside and outside of
capsule for pressure difference-△P。 The △P have the free end of the capsule shift proportional to the pressure
difference. The shift driven and magnified by link can move the pointer on the shaft, and indicate the pressure
difference on the scale board. Positive and negative pressure can be measured by turn on and turnoff the
balanced valve. (Explanation see below)
6、密封性試驗:1.5倍的工作壓力歷時 10分鐘不得滲漏(雙邊受壓)
7、刻度弧長:110mm
8、儀表重量:約3 公斤
6、Closed-chamber Test:No leak for 10 mins 1.5 times operation pressure (Pressure at both sides)
7、Arc of scale:110mm
8、Weight of Instrument:About 3 Kg
差壓 單位 Unit 規(guī) 格 Specification
Pa 250、400、600、1000、1600、2500、4000、6000、10000、16000、25000
流量
單位 Unit 規(guī) 格 Specification
Flow NM 3 /h
4,5,8,10,16,20,25,32,63,125× 10 n
(n為整數,正、負或零) (n is round number,positive, negative or zero )
Different
Pressure
MODEL YE-330.FG.200